Descriptions of CNC Press Brake WE67K:
Hydraulic system:
A complete electrolyte servo synchro CNC (Computer Numerical Control) controlled press brake.
Adopt Bosch electrolyte servo system (from Germany)
Mechanical system:
Two light rulers are installed at the two ends of the slide, making the slide movement be parallel to the working table
Adopt the working table compensation structure.
The CNC servo motor of the back gauge gives a high positioning accuracy.
CNC system:
The DA65W computer imported from Holand Delem Co.
Automatically calculate the working time and quantities of press brake actions.
For single step operation, the user only needs to input the relevant data into the system, and then the system will check out the pressure needed for press brake and get every thing in order.
When making several steps press brake actions on the parts, the user just needs to input the intended dimensions into the system, and then the system can make continuous press brake actions according to the requirements.
Can store 25 press brake procedures.
Give alarm signals on incorrect operations
Automatically control the following datum: pressure discharge time, pressure keeping time, press brake pressure, press brake angle, the opening height of slide and etc.
Option
Cybelec DNC880S system, made in Switzerland;
Delem DA56,DA65W, DA66W system, made in Holand;
Synchro control system:
Two light rulers (Y1-Y2) have been installed at the two sides of the machine to measure the exact distances.
The position data will be delivered to the CNC system and then it can check out the servo valve control signal (S2-S2).
Transmission system:
High-precision ball screw and linear guide-way
PANASONIC HINAS A4 series; AC servo motor and drive;
Compensation System:
WILA deflection compensation;
Automatic worktable compensation for wear and tear of the bed
The deviation resistance ability of the machine tool:
The electrolyte servo system of this forging machine is an inner closing ring control system, which can check out the synchro discrepancies of the slide by the movement of the light ruler.
The electrolyte servo valve can correct the slide discrepancies, making the slide parallel to the working table.
Technical Parameters of CNC Press Brake WE67K:
Models |
Nomal Pressure(kN) | Length of Table (mm) | Distance Between Housing (mm) | Throat Depth (mm) | Stroke (mm) | Open Hight (mm) | Main Motor (kW) | Weight (t) | Overall Dimensions (L x W x H) (mm) |
| WE67K-63/2500 | 630 | 2500 | 2000 | 320 | 150 | 400 | 5.5 | 5 | 2875x1650x2350 |
| WE67K-63/3200 | 630 | 3200 | 2700 | 320 | 150 | 400 | 5.5 | 5.5 | 3800x1650x2450 |
| WE67K-100/3200 | 1000 | 3200 | 2700 | 400 | 180 | 460 | 7.5 | 7.5 | 3810x1750x2480 |
| WE67K 125/3200 | 1250 | 3200 | 2700 | 400 | 180 | 460 | 7.5 | 8.2 | 3820x1800x2500 |
| WE67K-125/4000 | 1250 | 4000 | 3200 | 400 | 180 | 460 | 7.5 | 9 | 4600x1800x2560 |
| WE67K 160/3200 | 1600 | 3200 | 2700 | 400 | 180 | 460 | 11 | 10.8 | 3830x2030x2560 |
| WE67K 160/4000 | 1600 | 4000 | 3200 | 400 | 180 | 460 | 11 | 11.5 | 4610x2030x2700 |
| WE67K-200/3200 | 2000 | 3200 | 2700 | 400 | 180 | 460 | 11 | 12.5 | 3900x2050x2560 |
| WE67K-200/4000 | 2000 | 4000 | 3200 | 400 | 180 | 460 | 11 | 13.8 | 4620x2050x2750 |
| WE67K-200/6000 | 2000 | 6000 | 4800 | 400 | 180 | 480 | 11 | 18.5 | 6050x2300x3200 |
| WE67K-250/3200 | 2500 | 3200 | 2700 | 400 | 200 | 480 | 15 | 15 | 3900x2100x2650 |
| WE67K-250/4000 | 2500 | 4000 | 3200 | 400 | 200 | 480 | 15 | 16 | 4620x2100x2800 |
| WE67K-250/5000 | 2500 | 5000 | 4000 | 400 | 250 | 560 | 15 | 18.5 | 5088x2570x3100 |
| WE67K-250/6000 | 2500 | 6000 | 4800 | 400 | 250 | 560 | 15 | 20 | 6080x2570x3300 |
| WE67K-300/4000 | 3000 | 4000 | 3200 | 400 | 250 | 560 | 22 | 19 | 4080x2300x3200 |
| WE67K-300/5000 | 3000 | 5000 | 4000 | 400 | 250 | 560 | 22 | 23 | 5100x2400x3600 |
| WE67K-300/6000 | 3000 | 6000 | 4800 | 400 | 250 | 560 | 22 | 27 | 6150x2500x3600 |
| WE67K-400/4000 | 4000 | 4000 | 3200 | 400 | 320 | 630 | 30 | 27 | 4100x2750x3600 |
| WE67K-400/5000 | 4000 | 5000 | 4000 | 400 | 320 | 630 | 30 | 32 | 5100x2750x3800 |
| WE67K-400/6000 | 4000 | 6000 | 4800 | 400 | 320 | 630 | 30 | 38 | 6150x2750x4000 |
| WE67K-500/4000 | 5000 | 4000 | 3200 | 400 | 320 | 630 | 37 | 40 | 4150x3500x3980 |
| WE67K-500/5000 | 5000 | 5000 | 4000 | 400 | 320 | 630 | 37 | 45 | 5150x3600x4700 |
| WE67K-500/6000 | 5000 | 6000 | 4800 | 400 | 320 | 630 | 37 | 50 | 6150x3617x5200 |
| WE67K-600/5000 | 6000 | 5000 | 4000 | 500 | 320 | 630 | 45 | 62 | 5150x3800x5200 |
| WE67K-600/6000 | 6000 | 6000 | 4800 | 500 | 320 | 630 | 45 | 68 | 6150x4435x5500 |
| WE67K-800/5000 | 8000 | 5000 | 4000 | 500 | 350 | 800 | 55 | 75 | 5160x4500x5300 |
| WE67K-800/6000 | 8000 | 6000 | 4800 | 500 | 350 | 800 | 55 | 85 | 6200x4915x5800 |
| WE67K-1000/6000 | 10000 | 5000 | 4800 | 500 | 400 | 800 | 55 | 105 | 6500x4935x6300 |
As a China electrohydraulic synchro hydraulic press brake (CNC) manufacturer and supplier, we can provide quality, reliable and convenient machines. Due to the good property and reasonable price, our electrohydraulic synchro hydraulic press brake (CNC) have been certified by ISO9001:2000 and CE. They are exported to more than 30 countries such as India, Vietnam, Malaysia, Saudi Arabia, Iran, Algeria, Poland, Spain, Chile, America, and Australia and so on. Our products are globally welcomed!
Besides electrohydraulic synchro hydraulic press brake (CNC), we also provide hydraulic shearing machines and plate bending machines, welcome to choose!
English 
Español
Français